60E3F扩容32G升不了级
在这里购买了60E3F(0000)扩容数据，自动识别EMMC大小的这个数据，原机8G内存，我更换32G内存后，用购买的软件无法升级？怎么处理？打印信息如下
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1F600000
GOP Boot Logo Index 1
create instance at 28804838 with private size 1732 bytes at 28804888
: VCmdQSize = 0xtx < GE_VCMDQ_SIZE_MIN = 0xtx
create instance at 28804F50 with private size 10112 bytes at 28804FA0
create instance at 28807728 with private size 1928 bytes at 28807778
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
** Partition 0 u16IRKeycode = 43 u8RepeatFlag = 0
not valid on device 0 **
** Unable to use usb 0:0 for fatload **
reading /TargetHis/His668Upgrade.bin
u16IRKeycode = 43 u8RepeatFlag = 1
1 bytes read
reading /TargetHis/His668Upgrade.bin
16384 bytes read
reading /TargetHis/His668Upgrade.bin
-1584885728 bytes read
u16IRKeycode = 43 u8RepeatFlag = 0
u16IRKeycode = 43 u8RepeatFlag = 1
cmd=filepartload 2882A0B0 /TargetHis/His668Upgrade.bin 0 F0
cmd line size exceed 128
LoadScript2DramByUsb:833: Error: check_script_crc Fail !!
MBoot will reset within 10s, if you don't want to reset, please run wdt_enable 0!!
jump_to_console start!!
<< M7332 >># u16IRKeycode = 43 u8RepeatFlag = 0
u16IRKeycode = 43 u8RepeatFlag = 1
u16IRKeycode = 43 u8RepeatFlag = 0
u16IRKeycode = 43 u8RepeatFlag = 1
u16IRKeycode = 43 u8RepeatFlag = 0
u16IRKeycode = 43 u8RepeatFlag = 1
UART_115200
AC_ON
00-2L-SM-02-20190530
MIU0_DQS-OK
BIST0-OK
*optee teeloader entry
CusConfig
eMMC_RPMB_Check_Program_Key
*ree_opt=00000023
Auth reeloader...
Decrypt reeloader...
Version check on reeloader...
reeloader_addr=20100000
NOTICE:BL3-1: v1.1(debug):
NOTICE:BL3-1: Built : 23:56:10, Apr9 2020
INFO: warmboot return address : 7dd01c00
INFO: BL3-1: Initializing runtime services
NOTICE:From args : boot_mbx = 2002808c
INFO: mstar_send_magic_ATF 479
INFO: BL3-1: Initializing BL3-2
ramlog_init init success
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x20100000
INFO: BL3-1: Next image spsr = 0x1d3
INFO: BIN1_32bit mode Apr9 2020 23:56:08
INFO: R1 0
INFO: R2 0
INFO: R3 0
ree_entry
U
Relocation Offset is: 01A00000
hs>>power-on
U-Boot 2011.06-00021-g45c54cd-dirty (May 16 2020 - 18:47:13)
===== sw IR Config Register =====
===== Attach IR Interrupt======
: Function = SYSOpen, Line = 3402, current resource pri_shm content is: 0
: Function = SYSOpen, Line = 3421, OPEN INSTANCE...
create instance at 287F3A50 with private size 108 bytes at 287F3AA0
: miu opencreate instance at 287F3B10 with private size 168 bytes at 287F3B60
create instance at 287F3C10 with private size 60 bytes at 287F3C60
uboot held at ,size=012220A0
Uboot Relocation:152 MiB
Now running in RAM - U-Boot at: 28E00000
eMMC: HS400 5.1 200MHz
eMMC 29.12 GB
CID:0x00A98428
0xABD20032
0x33305032
0x5900019B
eMMC SLC mmc type 0%-10% device life time used
eMMC MLC mmc type 0%-10% device life time used
eMMC pre_eol_info normal
DRAM : 1536MB
SAR5=ON
Net: No ethernet found.
no eeprom
0x18 0x30 0xC 0x97 0xD 0xDD
MACaddr = 0x180x300xC0x970xD0xDD
the same ethaddr!
MAC:0x18: 0x30: 0xC: 0x97:0xD: 0xDD
create instance at 288040D8 with private size 44 bytes at 28804128
Hit ~ to stop autoboot:0
In: serial
Out: serial
Err: serial
LEDcontrolType=1
IIC colorLEDcotrol--LED breath FAIL!!
Judge Raw EMMC
Not Raw eMMC
ProjectId 120
ProjectIdBack 120
Same ID, don't need load datasepara
mmc change mount : tvconfig
** File not found model.info
vfs_getsize:420: ext4filesize mmc fail, try again!
** File not found model.info
vfs_getsize:424: ext4filesize mmc fail
No enough buffer or path fail(model.info) :
model.info not find !! Clean model_info env
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
0:MCP_X_D3_2133_8G_4x
1:MCP_X_D3_2133_4G_4x
DRAM Channel 0 Size =
Changelist: 24543697
============= set bootargs ===============
CS602 IC, need write every time!!!
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
TCON_2in1_ADDR: 266
Hit Enter to stop autoboot:0
enable dont overwrite function
ToFacMode is M
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Boot Check: Reboot by WDT --------
hisense>>AC on
Not in Factory Mode
boot from dynamic ir
fore uup u8KeyPad_KeyVal
BootMode update by force_upgrade
Boot Check: BootMode = 4 --------
Upgrade Version: 1.0
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Writing to MMC(0)... 128 blocks written: OK
128 blocks written: OK
done
Check USB port:
usb_lowlevel_init++
USB EHCI LIB VER: 2014.10.02
Port 0 is Enabled
TV_usb_init (UTMI Init) ++
UTMI Base 1F207500
UHC Base 1F204800
USBC Base 1F200E00
BC Base 1F246C00
config miu select ]
enable miu lower bound address subtraction
init squelch level 0xE
TV_usb_init--
Usb_host_Init++
Async base addr: 0x97CDD80
Reg 0x28: 0xDD80 0x97C
disable run
Host Speed:2
enable aynch
Usb_host_Init--
usb_lowlevel_init--
scanning bus for devices... New Device 0
control1 max:40
interface conf:1 value 8:
1 USB Device(s) found
scanning bus for storage devices... no_of_ep: 2
find bulk ep: 0
find bulk ep2: 1
bulk max packet size: ep(in) 0x200, ep2(out) 0x200
bulk0 is in
max lun:0
1 Storage Device(s) found
Search_tvdatabase
** Find tvdatabase **
mmc change mount : tvdatabase
Size of file "/readme" from mmc device 0 partition tvdatabase: 51 bytes
find readme, do not upgrade tvdatabase
Current state ->
create instance at 28804648 with private size 408 bytes at 28804698
MOD Output Channel Order not set!!!!
Active Standby Mode FALSE =====
MsDrv_PNL_Init:Bypass SetDivison
MDrv_PNL_Init u32PnlRiuBaseAddr = tx
MDrv_PNL_Init u32PMRiuBaseAddr = tx
MDrv_PNL_Init g_ptr_XCExtendRiuBaseAddr = 1F600000
LINK TYPE = EXT
Vx1 2 division
Vx1 2 division
No instance existed, please get an instance by calling MApi_XC_Init() first
->I-PWM init; ->V-PWM init begin!
init V_PWM_ENABLE = 1
force set safemodeset off
get backlight level form deviceinfo =40000
init I_PWM_ENABLE = 1
force set safemodeset off
->I-PWM init; ->V-PWM init end!
Active Standby Mode FALSE =====
u32Result=tx, after mask u32Result=tx
EN_DEMURA_MULTI_NOT OK
MApi_Demura_Init:296: multi_vendor input is not valid, init fail
Wait for PM51 standby DRAM ...........PM51 run ok...........NO PanelOnTiming3 Delay ....
---MsDrv_PNL_BackLigth_On:1558 Set MsDrv_PNL_BackLigth_On DelayTask 1182
Active Standby Mode FALSE =====
GOP Boot Logo Index 1
create instance at 28804838 with private size 1732 bytes at 28804888
: VCmdQSize = 0xtx < GE_VCMDQ_SIZE_MIN = 0xtx
create instance at 28804F50 with private size 10112 bytes at 28804FA0
create instance at 28807728 with private size 1928 bytes at 28807778
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
No instance existed, please get an instance by calling MApi_XC_Init() first
** Partition 0 not valid on device 0 **
** Unable to use usb 0:0 for fatload **
reading /TargetHis/His668Upgrade.bin
1 bytes read
reading /TargetHis/His668Upgrade.bin
16384 bytes read
reading /TargetHis/His668Upgrade.bin
-1584885728 bytes read
cmd=filepartload 2882A0B0 /TargetHis/His668Upgrade.bin 0 F0
cmd line size exceed 128
LoadScript2DramByUsb:833: Error: check_script_crc Fail !!
MBoot will reset within 10s, if you don't want to reset, please run wdt_enable 0!!
jump_to_console start!!
<< M7332 >># UART_115200
用的32G长江储存，升不了级，换了海力士64G，还是升不了级，管理看到后麻烦回复一哈 已发送私信，请注意查收
页:
[1]